### General Anchor Fastener Tags
1. **Type**: Identifies the anchor type (e.g., mechanical, chemical, expansion, undercut, screw, sleeve, drop-in, adhesive).
2. **Material**: Specifies the material composition (e.g., carbon steel, stainless steel, zinc-plated steel, epoxy, polyester resin).
3. **Diameter**: The diameter of the anchor, which can influence the load capacity.
4. **Length**: Length of the anchor, which affects embedment depth and the strength of the attachment.
5. **Load Capacity**: Maximum load the anchor can support, often specified in terms of tension and shear loads.
6. **Drill Bit Size**: Recommended drill bit size for pre-drilling holes for the anchors.
7. **Minimum Embedment Depth**: The minimum depth at which the anchor must be installed to achieve the stated load capacity.
8. **Corrosion Resistance**: Indicates the anchor's resistance to environmental conditions that can cause corrosion.
9. **Application**: The specific applications or environments where the anchor is best used (e.g., indoor, outdoor, wet conditions, seismic applications).
10. **Certifications/Standards**: Compliance with international standards or certifications (e.g., ASTM, ETA, ICC-ES).
### Chemical Anchor Fastener Tags
1. **Resin Type**: Type of resin used (e.g., epoxy, polyester, vinylester), which affects the chemical resistance and bonding strength.
2. **Cure Time**: The time required for the chemical anchor to fully cure or harden.
3. **Working Time**: The time period during which the chemical anchor can be adjusted or manipulated after installation but before it cures.
4. **Temperature Range**: The range of temperatures in which the chemical anchor can be effectively installed and maintained.
5. **Shelf Life**: The period during which the chemical components remain usable before mixing.
6. **Mixing Ratio**: The required proportion of resin to hardener or activator, if applicable.
7. **Usage Instructions**: Specific instructions for mixing, applying, and curing the chemical anchor.
8. **Packaging**: The form in which the chemical anchor is sold (e.g., cartridges, sachets, bulk).
